Kelmore LevelMore Absolute 30 Ultra-rapid Flexible 2-part Levelling & Smoothing Compound 20kg

Description

LevelMore Absolute 30: An ultra-rapid setting, high performance, flexible, 2-part levelling and smoothing compound

Kelmore’s LevelMore Absolute 30 is an ultra-rapid setting, high-performance, flexible, 2-part levelling and smoothing compound which can be applied from 2mm to 20mm in a single application. Ensuring excellent adhesion, it is suitable for use on a wide range of subfloors, most without the need to prime. Its dependable moisture tolerance also enables the use of damp-proof membranes. Providing superb flowing capabilities and dimensional stability, this protein-free product sets with an outstanding surface finish and can be walked on after just 30 minutes. Resilient floor coverings can be fitted after just 90 minutes and porcelain, ceramic, and natural stone tiles can be fixed after only 45 minutes.

Product Details:

Classification (EN 13813): CT-C16-F10
Unit Size Bag: 20kg
Pouch: 4.5 litres
Application Temperature (air and background): ≥ 5˚C
Application Thickness: 2mm – 20mm
Working Time @20˚C : 15 minutes
Walk on @20˚C : 30 minutes
Tile after @20˚C : 45 minutes
Fit resilient floor coverings @20˚C : After 90 minutes
Consumption per mm thickness: Approx 1.58kg /m2
Compressive Strength (After 28 Days): 16 N/mm2
Flexural Strength (After 28 Days): 10 N/mm2

Areas Of Use:
Interior Floors
Domestic & Commercial
Water & Electric UFH
Below Damp Proof Membranes
Over Adhesive Residues
Limited Movement / Vibration

Mixing:
LevelMore Absolute 30 is a 2-part product, LevelMore Absolute 30 powder must only be mixed with LevelMore Absolute 30 liquid at a ratio of 20kg powder to 4.5 litres. Pour the LevelMore Absolute 30 liquid into a clean bucket. Gradually add the powder whilst mixing thoroughly with an electric paddle mixer until a smooth, lump-free consistency is achieved. The compound is ready for use immediately after mixing.

Application:
LevelMore Absolute 30 can be applied at a thickness of 2mm to 20mm in a single application. Pour the mixed compound onto the prepared floor before using a trowel or rake to regulate the thickness and guide the product into the desired areas. Whilst the product is still wet, the use of a *spiked roller can further enhance the surface finish by removing any trapped air.

*The use of a spiked roller is only recommended when the product has been applied at a thickness that will allow the roller to freely roll through the compound.

Drying:
Drying times will vary depending on the porosity of the background, ambient temperature and humidity. When tested to the industry standard temperature of 20°C, LevelMore Absolute 30 can be walked on after 30 minutes. Resilient floor coverings can be fitted after 90 minutes and porcelain, ceramic, and natural stone tiles can be fixed after 45 minutes. Please be aware that higher temperatures and low humidity will shorten the drying time and lower temperatures and high humidity will extend the drying time.

Coverage:
Coverage will vary depending on the background’s texture and the product’s application thickness. As a guide, a 20kg bag of LevelMore Absolute 30 powder mixed with 4.5 litres of LevelMore Absolute 30 liquid will provide the following approximate coverage:

For a 2mm thick adhesive bed, it will cover about 6.3m²
For a 3mm thick adhesive bed, it will cover about 4.2m²
For a 5mm thick adhesive bed, it will cover about 2.5m²
For a 10mm thick adhesive bed, it will cover about 1.26m²
For a 20mm thick adhesive bed, it will cover about 0.63m²