Kerakoll Aquastop Green Anti-Cracking Waterproof Membrane (1.15m2)

Description

Anti‑cracking waterproof membrane with high adhesion for balconies, terraces and horizontal surfaces before the laying of ceramic tiles, natural stone and hardwood floors; it creates a waterproof surface even when overlaid on cracked supports, supports that have not been perfectly cured or supports that might contain vapour pressure due to residual substrate moisture content.

Aquastop Green revolutionises laying with the Laminate No Crack, re‑writing performance standards to allow applications that are impossible for mineral products.

– Specific for anti‑cracking laying with H40 Gel in the revolutionary Laminate No Crack
– It waterproofs any surface, old or new, damp or dry, cracked or subject to dimensional variations
– It compensates for hygrometric shrinkage and thermal deformation stress
– It reduces on‑site working times: waterproofing and laying of the coating without waiting, withstands foot traffic immediately
– Solves the problem of respecting substrate joints in staggered or diagonal laying (cuts in doorways)

Product Details:

Appearance: Composite polymeric membrane
Roll width: 1.15m
Colour: White/Transparent/Green
Shelf life: 24 months from the date of production in a cool dry place
Length: 20m EN 1848-2
Thickness: 4mm EN 1849
Longitudinal elongation: 20% DIN 53504 / ISO 254
Transversal elongation: 25% DIN 53504 / ISO 254
Substrate residual humidity: Max 8% EN 10329
Watertightness: ≥ 60 kPa / 24 h EN 1928
Watertightness: In Ca(OH)2 ≥ 2 kPa / 24 h EN 1847
Watertightness: To heat (+70 °C) ≥ 2 kPa / 24 h EN 1296
Mould growth: Prevents mould growth ANSI A 118.12 Test Report TCNA-0791-20
Size: Sold In Multiples of 1Lm (1.15m²)
Internal & External Use
Hydrophobic PA Fibres
Highly Breathable
Uncoupling & Anti-Cracking

Please Note: Avoid direct exposure to sunlight and sources of heat

Substrates:
– screeds, including any that are cracked and not completely cured or with possible vapour pressure caused by residual humidity, heat radiant slabs
– existing ceramic, marble floor tiles, natural stone floorings anchored to the substrate
– cured concrete
– fibre-cement and plaster-board panels anchored to the substrate.

Do not use on anhydrite-based substrates without the use of Primer A Eco professional, concentrated, water-based surface insulation, on bituminous sheeting, on exposed surfaces, on inverted roofs made with insulation panels or low-density screeds.