Description
Tilemaster Anti-Fracture Mat is an uncoupling/decoupling mat designed for use on floor tile installations to prevent substrate lateral movement from cracking the tiled finish. Tilemaster Anti-Fracture Mat can be used in a wide range of applications to absorb lateral movement from substrates and to bridge stress/shrinkage cracking in substrates to prevent such movement from being transferred to the tiled finish. The matting can be used when installing a large variety of tiles including ceramic, porcelain and natural stone tiles. Tilemaster Anti-Fracture Mat is ideal for domestic and commercial applications in light, medium and heavy-duty environments.
Composition: Three-layer composition: two outer layers of non-woven polypropylene with an inner butyl layer
Colour: Grey base layer with a white branded top layer
Sheet Thickness: 0.85mm
Length: 20m
Roll Weight: 9.2kg
Size: 20m x 1m
Shelf Life: 24 months when stored in cool and dry conditions away from direct sunlight
Preparation:
Before starting, all substrates must be clean, dry, sound and strong enough to support the weight of the tiles, tile adhesive and grout. Remove all dust, dirt, oil, grease and other contaminants that may affect adhesion.
Advantages:
– Three Layer Uncoupling / Decoupling Mat Designed To Accommodate & Absorb Lateral Movement In Sub-floors To Prevent Cracking The Tiled Finish
– Ideal For Underfloor Heating Systems
– Can Be Tiled Over Immediately After Fitting The Mat
– Less Than 1mm Thick – Minimises Height Build Up
– Cuts Costs And Uses Less Adhesive Than Cavity Mats – Approximately 30kg Less Per 20 Metre Roll
– Simply Butt-joint, No Need To Overlap Or Use Jointing Tape
Substrates:
Sand/Cement Screed
Concrete
Plywood Overlay
Electric Underfloor Heating
Water/Wet System
Underfloor Heating
Tile Backer Boards
Tile on Tile
Flooring Grade Asphalt & Bitumen
Anhydrite Screeds
Fibre Cement Sheet
T & G Floorboards
Floating Floors
Existing Vinyl Tiles
Steel/Metal Surfaces
Fibreglass